Supermicro Motherboard MBD-X10SLQ-L-B Core i7/i5/i3 LGA1150 Socket H3 Q87 DDR3 SATA microATX Bulk

MPN
MBD-X10SLQ-L-B
Form Factor
uATX

Processor/Cache
CPU:
Intel 4th Gen Core i7/i5/i3, Pentium, Celeron processors
Single Socket H3 (LGA 1150)
System Memory
Memory Capacity:
2x 240-pin DDR3 DIMM sockets
Supports up to 16 GB DDR3 non-ECC Un-Buffered memory (UDIMM)

Memory Type:1600MHz non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes:8GB, 4GB, 2GB, 1GB
Memory Voltage:1.5V, 1.35V
On-Board Devices
Chipset:Intel Q87 Express Chipset
SATA:SATA3 (6Gbps) w/ RAID 0, 1, 5, 10 via PCH with Intel RST

Network Controllers:
Intel i217LM + Intel i210AT Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio:RealTek ALC888S 7.1 High Definition Audio
Video:Intel HD/4600 Processor Graphics
Super I/O:NCT6776D
Input / Output
Serial ATA:5x SATA 3.0 ports (6Gbps)
LAN:2x RJ45 Gigabit Ethernet LAN ports

USB:
2x USB 3.0 ports (2 rear)
6x USB 2.0 ports (2 rear, 4 via headers)

Audio:7.1 HD Audio header and rear I/O
Display:1x VGA, 1x HDMI, 1x DVI-D, 1x Display port from Intel HD 4600 Graphics, 3x Independent Displays
Serial Port / Header:4x COM ports (headers) COM2 with RS422/485 support
DOM:SATA DOM (Disk on Module) power connector support
Security:1 TPM 1.2 20-pin Header
Expansion Slots
PCI-Express:
1x PCI-E 3.0 x16 (in x16) slot
1x PCI-E 2.0 x4 slot
1x PCI-E 2.0 x1 slot

System BIOS
BIOS Type:128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features:
DMI (SMBIOS) 2.7
ACPI 5.0
USB Keyboard support
Management
Software:
SuperDoctor III
Watch Dog
AMT
NMI
vPro

Power Configurations:
ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on
PC Health Monitoring
Voltage:
Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN:
Total of four 4-pin fan headers supporting up to 4 fans
4x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
Monitoring for CPU and chassis environment
CPU thermal trip support
Adaptive Thermal Monitor, PECI 3.0

LED:
CPU / System Overheat LED
+5V Standby alert LED

Other Features:
Chassis intrusion detection
Chassis intrusion header