Supermicro System SYS-5019P-WTR 1U Intel Xeon C622 4x3.5 inch Hot-Swap SATA PCI Express Brown Box

Processor/Cache
CPU:
- Single Socket P (LGA 3647)
- Intel Xeon Scalable Processors
- Support CPU TDP 70-205W
Cores: Up to 28 Cores with Intel HT Technology
System Memory
Memory Capacity:
- 6 DIMM slots
- Up to 768GB ECC 3DS LRDIMM, 192GB ECC RDIMM, DDR4 up to 2666MHz
Memory Type: 2666/2400/2133MHz ECC DDR4 SDRAM
On-Board Devices
Chipset: Intel C622 chipset
SATA: SATA3 (6Gbps) RAID 0, 1, 5, 10
Network Controllers: Dual 10GBase-T LAN with Intel X772 + X557
IPMI:
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video: ASPEED AST2500 BMC
Input / Output
SATA: 10 SATA3 (6Gbps) ports
LAN:
- 2 RJ45 10GBase-T LAN ports
- 1 RJ45 dedicated IPMI LAN port
USB:
- 2 USB 3.0 ports (rear)
- 2 USB 2.0 ports (rear)
Video: 1 VGA port
Serial Port / Header: 2 COM ports (1 rear, 1 header)
SuperDOM: 2 SuperDOM (Disk on Module) ports with built-in power
System BIOS
BIOS Type: AMI 32Mb SPI Flash ROM
Management
Software:
- Intel Node Manager
- IPMI 2.0
- KVM with dedicated LAN
- NMI
- SPM, SUM
- SuperDoctor 5
- Watch Dog
Power Configurations: ACPI / APM Power Management
PC Health Monitoring
CPU:
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
FAN:
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature:
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
Form Factor
1U Rackmount
Available Colors
Black
Front Panel
Buttons:
- Power On/Off button
- System Reset button
LEDs:
- Power LED
- Hard drive activity LED
- Network activity LEDs
- System Overheat LED
- Information LED (temp., status)
Expansion Slots
PCI-Express:
- 2 PCI-E 3.0 x16 (FHFL) slots
- 1 PCI-E 3.0 x8 (LP) slot
Drive Bays
Hot-swap: 4 Hot-swap 3.5" SATA3 drive bays
M.2: M.2 mini-PCI-e support
System Cooling
Fans:
- 5 Counter-rotation 40x56mm PWM fans
- 1 fan for AOC cooling (option)
Power Supply
500W Redundant Power Supplies with PMBus
Total Output Power: 500W
Input: 100-240Vac, 50-60Hz, 6.1-2.6A
+12V: Max: 42A / Min: 0.5A
+5Vsb: Max: 4A / Min: 0A
Output Type: Gold Finger Connector Mating with Molex 45984-4343
With Power Distributor:
- +5V: 25A
- +3.3V: 12A
- -12V: 0.6A
Certification: UL/cUL/CB/CE/BSMI/CCC
Operating Environment
RoHS: RoHS Compliant
Environmental Spec.:
- Operating Temperature: 10^oC to 35^oC (50^oF to 95^oF)
- Non-operating Temperature: -40^oC to 60^oC (-40^oF to 140^oF)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing)
Item Dimension ( L inch x W inch x H inch)
34 x 24 x 9
Weight
48.00 lb